Roof India 2015

Maris Polymers participates at ROOF INDIA EXHIBITION, Asia’s most definitive expo for roofing and allied products.

22-24 May, 2015, Mumbai exhibition centre, Mumbai, India. Stand number: F24

Museo Del Ferrocarril, San Luís Potosí, Mexico

projectmuseomexico1

Roof Waterproofing at Museo Del Ferrocarril, San Luís Potosí, Mexico The roof of Museo Del Ferrocarril in San Luís Potosí in Mexico needed a waterproofing system environmentally friendly, water-based, durable with high impact and abrasion resistant finish,

should also function as crack-bridging but on the same time be hard elastic.

The solution for this application problem was offered by MARIS POLYMERS in the form of the liquid-applied polyurethane waterproofing system the MARISEAL SYSTEM AQUA.

Products used

MARISEAL AQUA PRIMER:  Two component epoxy primer. Water-Based. 

MARISEAL 250 AQUA:  liquid-applied, highly permanent elastic, cold applied and cold curing, water based, one component, 100% polyurethane-based membrane used for long-lasting waterproofing.

MARISEAL FABRIC: Specialized non-woven, needle punched polyester geotextile used for reinforcement for the MARISEAL 250 AQUA.

MARISEAL 400 AQUA: Water-Based, pigmented, wear resistant, semi-rigid, color- and UV-stable, weather- stable, one component, aliphatic , 100% polyurethane coating used as a top-coat for protection over MARISEAL® 250 AQUA waterproofing membrane.

MARISEAL SYSTEM AQUA is a group of coatings based on water-based Polyurethane resins which used on combination, creates a seamless membrane on the flat roof/terrace or deck and protects the building structure reliably and on a long term basis even under the most difficult conditions.

The MARISEAL SYSTEM AQUA is based on the innovative PUD-Technology of MARIS POLYMERS which enable, long-chain polyurethane macromolecules to be incorporated in a water medium, forming stable dispersions. 

The PUD Technology based products, have the advantage that they offer the high level properties of solvent-based products in an ecological consumer and environmentally friendly, water-based low VOC, no ADR transport product. This Technology is the entry to the Green Revolution in Polyurethane based products.

BATIMATEC EXPO, 3-7 MAY, ALGERIA

batimec

Maris Polymers SA is pleased to invite you to its stand at BATIMATEC, 3-7 May 2015, Algeria, where you can join us for a business coffee and a friendly chat with the  Maris Polymers team. 

It is also the perfect opportunity to get to know each other better and learn more about what we have to offer you in polyurethane waterproofing. www.batimatecexpo.com

MosBuild 2015

BANNER-MOSSBUILD

Maris Polymers successfully participated in the “MosBuild 21st International Building & Interiors Exhibition” on April 14 – 17 2015, Expocentre, Moscow Russia. Thank you for visiting us!

 

mosbuild_mp MOSSBUILD

Balcony Waterproofing Lifting-INDIA

india2 india1

A residence in Dehradun India gets a brand new balcony waterproofing lifting. The project was at the Shabnam Singh residence complex in Dehradun and consisted of waterproofing of several balconies and terraces. Combining waterproofing and decoration, the residents of the house can now enjoy the balcony while protecting the interior rooms from humidity. The products used were the Mariseal Aqua Primer, Mariseal 250 Coating and the Mariseal 400 Top coat in white color of the COLORED BALCONY / TERRACE WATERPROOFING SYSTEM.

Terrace waterproofing and colored balcony waterproofing is very important for open-air exposed areas. Balconies and terraces, walkways, galleries, penthouses, loggias, the roofs of underground car parks used as plazas, decorative balconies and outdoor seating areas are constantly exposed to the elements. MARIS POLYMERS offers liquid-applied Polyurethane balcony / terrace waterproofing systems with long-term protection for plain colored decorative terraces that guarantee unalloyed enjoyment of the outside area – year after year. The MARISEAL SYSTEM® products can be used as solid color decorative self finished systems but can also be covered with tiles, paving or timber decking.

[/vc_column_text]

Corporate Responsibility

Corporate Responsibility

We at Maris Polymers take our social responsibility very seriously. We support and encourage our positive contribution to our local society as well as support worldwide vulnerable  groups in need. This year our support targeted two groups. One local group called « θεοφιλος» which offers shelter for abused mothers and children and “unicef” which mainly offers support to children worldwide.

http://www.theophilos.gr

http://www.unicef.org

Waterproofing of a Joan Miro fountain.

Miro_fountain02 Miro_fountain01

A 110m2 fountain was waterproofed using our very successful MARISEAL 300 Drinking Water Tank Waterproofing System. This fountain is holding a original Joan Miro sculpture and is recognized by art lovers worldwide.
In the new Joan Miro fountain our MARISEAL 300 Drinking Water Tank Waterproofing System was used to waterproof the entire surface.
The products used were the MARISEAL 750 which  is a transparent, rigid, two component epoxy solvent-free primer that cures by reaction of the two components. It is mainly used as a primer for polyurethane coatings. It can be used on surfaces like concrete, metal, wood and asphalt. It has simple application, excellent anchoring to the surface, solvent free and resistant to water. It provides high tensile and impact strength and also strong vapor barrier properties. The consumption is 250-300 gr/m2 in one layer. it is supplied in 8+4 kg pails. After the application of the MARISEAL 750 primer, allow 12 hours, and while the primer is still soft a bit the application of the polyurethane coating is necessary.

MARISEAL 300 is a liquid-applied, solvent-free, hard elastic, cold curing and cold applied, two component polyurethane membrane used for long-lasting waterproofing and protection. It cures by reaction of the two components. It is applied after 12 hours of the application of the MARISEAL 750 and it is used for the waterproofing of drinking water supply channels and pipes, tanks and large and small reservoirs, odorless waterproofing of wet areas, under tile, in bathrooms, swimming pools, kitchens. It is used for waterproofing of surfaces in direct contact with potable drinking water. It is certified for use in potable drinking water reservoirs, resistant to water by maintaining its mechanical properties over a temperature span of -40 C to +100C.  It remains elastic even at low temperatures with full adherence, and low cost.

[/vc_column_text]

Orca Whale Pool Waterproofing in Russia

cP4fZRv7rKu+blwAAAAASUVORK5CYII= wHBdIJPebXmAQAAAABJRU5ErkJggg== 9zx1AAAAAElFTkSuQmCC

 

A new home for the giant Orcas’ was created in Russia. Maris Polymers products were exclusively used to waterproof the 9000 m2 aquarium which will be the home of the Orca whales.

The project is the all-Russian Exhibition Shopping & Entertainment Complex: Recreational Facilities located in Moscow Russia.

The products used in this project were the DRINKING WATER TANKS WATERPROOFING SYSTEM. The products used where the Mariseal 750 Primer and the Mariseal 300 Waterproofing Coating.

The MARISEAL 300 Waterproofing System is a liquid-applied, solvent-free, hard elastic, cold curing and cold applied, two component polyurethane membranes used for long-lasting waterproofing and protection.

It is used for the waterproofing of drinking water supply channels and pipes, tanks and large and small reservoirs, odorless waterproofing of wet areas, under tile, in

bathrooms, swimming pools, kitchens.

It is used for waterproofing of surfaces in direct contact with potable drinking water. It is certified for use in potable drinking water reservoirs, resistant to water by maintaining its mechanical properties over a temperature span of -40 C to +100C.

It remains elastic even at low temperatures with full adherence, and low cost.

BAU 2015 – Munich

bau_2015 bannerfornews

Closing Report of  the BAU 2013 was: More international, more professional, more innovative. This year’s BAU 2015 will bring the Future of Building.

We at Maris Polymers SA invite you to participate in this Future and visit our stand at BAU 2015. The Exhibition will be held in Munich in Germany and will take place on 19-24 January 2015.

Please visit the BAU site: www.bau-muenchen.com

Thank you for visiting us at The Big 5 – Dubai 2014

big5_20152

big5_20151

 

 

 

 

 

 

 

 

 

 

 

 

 

To all our valued clients and visitors.. Our participation in Big 5 at Dubai wouldn’t have been such a great success without your presence and support! Thank you very much for passing by and we look forward to a continuous cooperation in the future to come.

page 1 of 3